Shop Pay Installments and PayPal Pay Later available at checkout. All Financing Options
Couldn't load pickup availability
Ask an Expert
Need help?
Call or Text Sales: (919) 408-7320
Support Text: (919) 619-5558
Email: sales@autorescuetools.com
- Sample Rate: 80 MS/s Single Channel
- Vertical Resolution: 12-Bit
- Input Range: ±50 mV to ±200 V
- DC Accuracy: ±1%
- Serial Decoding: CAN, CAN-FD, LIN, FlexRay
- Power: USB From PC or Tablet
The Autel MaxiScope MP608 is a 4-channel, 12-bit automotive oscilloscope that runs on a Windows PC or a compatible MaxiSys tablet. It connects and draws its power over USB 2.0, so there are no batteries or power leads to manage at the vehicle. Bandwidth is 20 MHz, the sample rate reaches 80 MS/s on a single channel (20 MS/s with channels combined), and a 32M-sample buffer is shared across the active channels. Input ranges run from ±50 mV to ±200V full scale with ±1% DC accuracy, so millivolt-level sensor signals and higher-voltage actuator circuits are measured with the same tool.
In the Bay
Advanced trigger actions hold the capture for the fault instead of the operator: edge, window, pulse width, interval and runt triggers catch the dropout or glitch that never shows up while someone is watching the screen. Custom math channels calculate values from captured channels on the scope itself, and automatic probe configuration cuts setup steps and channel setting errors.
The built-in automotive test library walks through guided procedures with reference waveforms and connection diagrams, so a known-good pattern sits next to the live trace. Serial decoding reads CAN High, CAN Low, CAN-FD, LIN, FlexRay, RS232/UART, I2C, I2S and USB 1.0/1.1 traffic from the wire when a network fault needs proof beyond a stored code.
Who It Fits
Diagnostic technicians who already run a MaxiSys MS906 MAX, MS906 Pro2-TS, MS909 S2, MS908CV II or MS909CV and want waveform testing on the tablet in their hands. Shops without a compatible tablet run the MP608 from any Windows PC at the bench. It suits drivability, network and electrical work where a meter reading is not enough to condemn a part.
What's Included
- MaxiScope MP608 main unit
- Scope test leads (4)
- Large dolphin clips, red/black (2)
- Small alligator clips, red/black (2)
- Secondary ignition pickup
- 20:1 attenuators (2)
- Multimeter probes, red/black (2)
- Back-pinning probes, red/green/blue/yellow/black (5)
- Flexible back-pinning probes, red/black (2)
- USB 2.0 cable V2
- Adjustable strap with hook
- Quick reference guide
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.